US Made AK Issues
Jump to navigation
Jump to search
RAS 47
- Mel64D looking at a RAS47 that was given to him by Rob Ski to exame to see where and how it failed
- Lost headspace and exploded after 200 rounds
- Lost headspace around 1500 rounds and exploded
- Locking portion of front trunnion sheared off
- Locking portion of front trunnion sheared off
- Locking portion of front trunnion sheared off
- AKOU 5000 round test
- Locking portion of front trunnion sheared off. Excessive wear on bolt
- Locking portion of front trunnion sheared off
- Showing extreme wear on bolt and hammer
- Receiver deformed causing bolt to not engage with the trunnion correctly
VSKA
- Lost Headspace and exploded
- Barrel pin that fell out during the 5000 round test that Tim (MAC) and James Yeager did. It lasted 1500 rounds.
- AKOU 5000 round test
- James Yeager 5000 round test
- Military Arms Channel at James Yeagers 5000 round test
C39/C39V2
- AKOU 5000 round test
- Excessive bolt wear
- Bulged receiver, but not in the RPK good sort of way
- Recoil guide rod broke
- Shares the BCG, trigger, and many other parts to the RAS47 so expect whatever issues that rifle had for the C39 to have as well.
IO
- AKOU 5000 round test | IO Response to AKOU test
- Examples of rivets being forced out of the front front trunnion because barrel was used as a bucking bar - 1 2 3
- Evidence barrel being used as a bucking bar
- Rivets poorly installed on trigger guard
- IO INC AK BOLT FAILURE! (Failed after 50 rounds)
- I.O. INC AK Shoot and Fail (Extended)
PSA AK
Other
